Oc'e South Africa is pioneering revolutionary printing technology that will allow signmakers to create three-dimensional signs by printing directly onto a rigid substrate (ie perspex), which is then vacuum-formed to create a 3D sign.
This patented technology is exclusive to the Arizona T220 flatbed printer, which can print directly onto rigid and flexible substrates up to 157.5cm wide by 304.8cm long by 5.1cm thick. The Arizona T220 holds substrates stationary while the print head assembly moves across to create the print. With four print heads per colour, the Arizona T220 can produce prints at a true production speed of up to 16.7m^2 per hour.
The utilisation of the Arizona T220 to create 3D signage by printing directly onto the rigid substrate prior to vacuum forming is the brainchild of Adrian Wolman, the CEO of Sign-Tronic. Wolman, who has 25 years` experience in the signmaking industry, spent many years developing the new 3D-signmaking technology, originally just trying to improve the quality and the raw material cost for manufacturing signs.
When Oc'e released the Arizona T220 flatbed printer two years ago, Wolman immediately saw the opportunity to print directly onto a rigid material such as perspex, which is used in the signage industry, although usually for backlit signs. The pre-printed perspex could then be vacuum-formed into a 3D sign. The challenge was that Wolman required ink that would achieve a high print quality, good colour density and UV stability.
Wolman collaborated with Cape Town company TechInk to formulate an ink that would print to his specific requirements. Of particular importance was that the ink not crack, discolour or peel after being vacuum-formed. Finally, about a year ago, the right ink formula was achieved. Then Wolman approached Pierre Albertyn of Polytech, a specialist in vacuum forming, to develop a process that would allow for the vacuum forming of a pre-printed substrate without affecting the sign`s clarity or colourfastness.
The men discovered that the secret to vacuum-forming a rigid, pre-printed substrate was being able to print in a distorted form in order to compensate for stretching of the image during the vacuum-forming process. This so-called "distort printing" was achieved, allowing Wolman to print the required image onto the substrate and then vacuum-form a three-dimensional sign.
Wolman points out: "The Arizona T220`s entire print head assembly moves over the substrate, which is held in place by a vacuum table system, and this ensures the absolute accuracy that is essential to this process."
This revolutionary approach to manufacturing 3D signs holds huge implications for the signage industry. 3D signs are traditionally made by printing onto self-adhesive vinyl, which is then applied to the moulded perspex. The new process eliminates much of the time and labour involved in the traditional approach, allows for more colour variations and is far more cost-effective. This process holds major advantages, in that the speed of production is unparalleled, the colour-fastness is excellent and the cost of production is much lower than that of traditional 3D signage production methods.
This technology was launched to the South African signage market at the Sign, Display and Digital Print Expo held in Johannesburg in August, and will be introduced to the rest of the world at Viscom in France in September, followed by SGIA in the US in October and ProSign in Frankfurt, Germany, also in October.
For more information, please contact Oc'e South Africa`s Luis Roldan or Wojciech Skrzeszewski on +27 11 661 9555 or Sign-Tronic`s Adrian Wolman on +27 21 425 4360.
Editorial contacts

