About
Subscribe

SDH the way forward for Teleco`s

Johannesburg, 05 Apr 2000

Plesiochronous Networks

  • SDH start
  • Advantages
  • Repairs
  • Control
  • Bandwidth
  • Standard
  • Alcatel Altech recently won a contract to supply Telkom with SDH (synchronous hierarchy) equipment. This marks the arrival of a infrastructure into the region that is able to cope with the heavy demands of intensive applications such as video conferencing and multi-media internet.

    To understand SDH we fist need to understand the dynamics of plesiochronous digital hierarchy, which evolved in response to the demand for voice services. While this system is designed for voice it is not the ideal for the delivery of high bandwidth connections. Using the same fibre synchronous network is able to increase the available bandwidth while reducing the amount of equipment required. Added to this is the management and control of the network becomes more flexible.

    The deployment of an SDH network is easy since the equipment is able to integrate with the existing plesiochronous systems. The SDH structure is able to define plesiochronous signals and encapsulate them into a standard SDH signal. Essentially this will protect the network operator`s investment in the plesiochronous equipment.

    The network management capabilities of a synchronous network offer an improvement of transmission networks, making tasks such as network reconfiguration and restoration to be quicker. SDH has been designed to support services that will be in demand in the near future such as Metropolitan Area Networks, Broadband ISDN and corporate communications networks.

    Plesiochronous Networks

    Plesiochronous is derived from the Greek word meaning "almost synchronous". The reason why this level of multiplexing could be regarded as complicated is that the number of 2 Mbit/p/s channels used are likely to have been generated on different equipment resulting in a slightly different rate. Before these channels can e interleaved they must all be brought to the same bit rate requiring `dummy information bits` or ` justification bits`. These bits are picked up when the de-multiplexing occurs and discard leaving the original signal in tact. These `justification bits` are used at every level of the hierarchy of multiplexing.

    The issue of flexibility in the plesiochronous network is limited when one considers an operator may need to deliver a corporate client with a 2Mbitp/s/ leased line. A high speed cannel passing near the client would in theory be able to provide a single 2Mbit line from within the channel.

    In reality it is slightly different, the `justification bit` at each level of the PDH implies identifying the exact location of the frames in a single 2Mbit line within a 140 Mbit/p/s channel is impossible. To access the a single 2Mbit/p/s line the 140Mbitp/s/ channel must be completely de-multiplexed into the 64 constituent 2Mb/p/s lines by 34 8mbit lines. After the 2Mbit lines has been extracted the channels must be multiplexed back up to the 140Mbit/p/s.

    This method does not translate into a flexible means of connection and rapid service provision, as the multiplexed mountains are extreme and expensive. Added to this is the issue of control, travelling through a network a 2Mbit line may go via different routes, the only manner of keeping tack of this is to keep detailed records of the interconnection equipment used. The issue of re-connection begins to make this whole aspect more difficult with the possibility of mistakes creeping becoming more apparent.

    The lack of flexibility of the PDH networks are also clear when it comes to being able to monitor performance. Operators need to be able to deliver improved availability and error performance the network management frame of PDH does not support such functions.

    SDH start

    Flexibility can seen as the driving factor behind the development, central to this was the ability to draw individual circuits from high capacity systems without having to go through the process of de-multiplexing.

    Synchronous transmission can be seen as the next level of fixed line communications in the hierarchical transmissions. The opportunity in developing the new standard has presented the ability to tackle a number of problems among these being the management capabilities and the interconnection between various equipment.

    The results were the CCTTT Blue Book of recommendations covering Synchronous Digital Hierarchy published in 1989. The American National Standards Institute published their SONET standards, which could be regarded as a subset of the now worldwide SDH standards.

    The recommendations of these bodies defined a number of transmission rates within the SDH framework. The first of these was the STM-1(Synchronous Transmission Module) with a transfer rate of 155Mbit/p/s. At the same time high rates of 622Mbit/p/s and 2.4Gbit/p/s were also defined as STM-4 and STM -16. The multiplexing structures were also defined to be able to carry a number of lower rate signals as part of the payload enabling the PDH signals to be transported on the network.

    Advantages

    The clear advantage of SDH is that it integrates efficiently with the existing PDH networks. All the signals transmitted over a PDH network can be carried on an SDH network. SDH defines a set of `containers` for each plesiochronous rate, the information from the rate is mapped into the relevant container. His process is similar bit stuffing in PDH multiplexing. The `container`s have control information added called `path overhead`. The `path overhead` information enables the operator to monitor the error rates in transmission. The container and `path overhead` form what is known as a `virtual container`.

    All equipment used in a synchronous network are set to the overall network clock, at some stage a slight delay could surface with the transmission link. Due to this sometimes the location of the `virtual containers` may not be fixed as the variations in the pointers would need to be adjusted to suit the position of the data in the `virtual container`.

    The combinations of virtual containers that that may be used to fill the payload can be repeated art several; layers of SDH. This results in the clustering of the containers. When the payload is full more control information is loaded to form the `section overhead`, which remain with the payload for the section between the two synchronous multiplexes. The section overhead data is thereto assist in access to functions and facilities for network control.

    Synchronous transmission allows the network to evolve to offer a variety of benefits to the operator and end user.

    The issue of managing a simpler networks is made more real when considering that a single multiplexer on an SDH network can carry out the task of an entire multiplexing mountain of a plesiochronous network. The means a lower operational cost for the operator as the amount of equipment needed to run a network is reduced.

    The `drop and insert` method of channel management will in the future lead to high bandwidth and accessibility.

    Repairs

    The nature of the SDH infrastructure is such that link and node failures will be detected immediately with traffic re-routed until the fault has been repaired. These failures will be invisible on an end to end basis and the failures will not disrupt service allowing operators to commit to delivery of services and network performance.

    Control

    The SDH frame structure is such that the network channels will make it fully manageable. The systems will be able to perform traditional event management functions like alarms within the network, performance monitoring, configuration management, resource management, security, planning and design.

    A corresponding reduction in the cost of running the network is the remote management and maintenance aspects.

    Bandwidth

    The ability to supply bandwidth on demand is an integral part of SDH. The operator will be able to allocate bandwidth to a user at short notice dynamically allocating the networks capacity as required. An example would be requesting the necessary bandwidth for a video conferencing connection by simply dialling a number, currently the request for additional bandwidth has to be booked days in advance.

    The increased convenience will allow users to become more acquainted with the technology and data intensive applications, adding to the revenue the operator is generating.

    Standard

    SDH standards have been designed to allows the transmission equipment of various manufacturers to interface. This has been achieved by the definitions of the fibre to fibre interfaces at the physical or photon level. The standards also determine the line rate, power levels, pulse and wavelengths.

    The standardisation offers the network operator the ability to be able to choose equipment from different vendors without having to worry about inter-operability. The operator can avoid being locked into proprietary solutions.

    Network operators around the world are adopting SDH as it improves the overall network performance resulting in a reduction of operational expense while being able to offer the end user a more robust service that can easily be monitored.

    The increased demand for high bandwidth services will usher in the SDH network as operator realise that they will need to keep the management of the network down to a simple and seamless task.

    Share